HOTSPOT-SETUP




To be able to configure an access point to the mikrotik must first be adjusted mikrotik IP address with the computer used to remotely mikrotik using Winbox, this is because the mikrotik can only be connected to the IP address of one class. Once you have configured your IP address then the connection can be tested by using the ping command.

The configuration on the mikrotik performed using Winbox :

  1. The process of checking the IP address. Checking local IP address serves to confirm the local computer hardware used in good condition. While checking mikrotik IP aims to ensure the computer is connected to the computer with a mikrotik router properly.
  2. After a well-connected network, then use application Winbox to facilitate the configuration settings in the graphics mikrotik using windows operating system. If the IP address has been set and no clashes IP address then it can be accessed by entering the IP address of mikrotik or if you have not set or the IP address clashes can still be accessed by entering the MAC address of a directly detected by Winbox.
  3. To mirotik created can be automatically detected on the network, then its DHCP client configuration must be enabled.
  4. Furthermore, should be made of the Domain Name System (DNS) server, it is aiming for a website translation can be done.
  5. For checking whether the mikrotik has been properly connected to the network, then test ping to www.google.com.
  6. Activation redius filtering function for users to be more specific.
  7. Because the term mikrotik access point called a hotspot then for subsequent use of said access point will be replaced with the word hotspot. configuration is started with an IP address, be it to a local network or to a hotspot.
  8. For the initial configuration settings for the hotspot, the configuration done by taking a hotspot setup options.
  9. In the input interface hostpot chose ether to be used for hostpot, and in this case ether3 is the interface that will be used to connect mikrotik to hostpot. Then click “next”.
  10. In data pengentrian Local Address of the Network included getway hotspot that serves as the destination address routing is used.
  11. Address Range Pool of Network is a DHCP IP that will be given to the hotspot. Exclusive IP DHCP can be adjusted as needed.
  12. Select Certificate, is a type of certificate that can be used.
  13. In the IP address of the SMTP server leave blank and click “next”.
  14. In the DNS Server enter the appropriate DNS server which is connected to the network.
  15. In the DNS Name could be emptied or filled with the desired DNS name.
  16. In the window directly hotspot users click “next”.
  17. If all steps have been well configure aka tone confirmation window stating the full configuration, and click “ok”.
  18. After all the steps completed will appear hotspot servers that have been configured.
  19. Normally a user at a hotspot there are only admin.
  20. To pengkonfigurasian in prioritizing bandwidth, then created a new profile that will be used on the specified user profile. For the profile of students granted 128k upload and download limits. And for the lecturers given limit upload and download 512 k.
  21. Furthermore, the profile that was created will be added into the list of profile and later can be used for users who have been determined.
  22. Furthermore, the development of the user that will be given a profile based on its data, professors or students. In this case the user will only be two trials for a while.
  23. On the menu will appear profile hotspots that have been made.


Changing the default login page mikrotik :

students can easily perform the login. The first stage of downloading log files contained in the mikrotik server using File Transfer Protocol (FTP) and that use is Filezilla.
The steps are:

  1. At the initial stage is to enter the destination address and its username and password and port, the port for FTP is 21.
  2. If you’ve connected login.html and then download the file if you want to change the display image can also download the image file on the mikrotik server .
  3. Once downloaded login.html page to edit as needed using a notepad.
  4. After finishing the edit save the data with the same name and upload back to the mikrotik server.
  5. Next is the default standard image editing mikrotik using photoshop.
  6. After finishing the edit, upload the image back to the mikrotik server and mikrotik login page views have changed, and will greatly facilitate users to perform the login process.
  7. Display mikrotik login page has changed, and the distribution of users according to the criteria also had to be done.

 
Make a Free Website with Yola.